S-RC052
Linksens focused on high-end intelligent water quality monitoring equipments and solutions
Gold-Membrane Online Free Chlorine Sensor S-RC052
5.0
Model:
S-RC052
Calibration Method:
Single point calibration
Peak Power:
0.5W
Resolution:
0.001mg/L
Response Time:
≤90s
Measuring range:
-5~60℃
Email:
sales@linksens-hk.com
Mob/WhatsApp:
+86-181 2391 1692
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Gold-Membrane Online Free Chlorine Sensor
The S‑RC052 Gold‑Membrane Online Free Chlorine Sensor is a three‑electrode constant potential current measurement sensor developed by our company with independent intellectual property rights. It can be used to measure the concentration of disinfectants such as residual chlorine, high‑purity gas dioxide, and ozone.
The electrodes incorporate an ARM processor and a high‑efficiency filtering algorithm to effectively avoid noise interference.
Technical Attributes
| S - RC052 Gold - Membrane Online Free Chlorine Sensor | |
| System | |
| Measurement Parameters | Residual chlorine, chlorine dioxide (high purity), ozone, total chlorine, etc |
| Water Sample Flow Rate | ＞400mL/min, and the flow rate shall be kept stable |
| Working Voltage | DC9 - 28V |
| Peak Power | 0.5W |
| Digital Output | RS485 - Modbus protocol (optional 4 - 20mA) |
| Electrode Material | Platinum/Gold |
| Disinfectant | |
| Measurement Range | 0 - 5/20mg/L |
| Accuracy | ±3% (DPD comparison error ±10% or ±0.05 mg/L, whichever is greater) |
| Response Time (T90) | ≤90s |
| Measurement Method | Reagent - free, electrochemical three - electrode amperometric assay system |
| Repeatability | ±3% |
| Calibration Method | Single - point calibration, Two - point calibration |
| Resolution | 0.001mg/L |
| Measurement Lower Limit | Lower detection limit: 0.030 mg/L or less |
| Sample pH Range | 4 - 9 |
| Temperature | |
| Measurement Range | - 5 - 60℃ |
| Measurement Method | Thermistor method |
| Accuracy | ±0.4℃ |
| Resolution | 0.1℃ |
| Calibration Method | Single point calibration |
| Repeatability | 0.2℃ |
Main Features
The electrochemical sensor has no reagent consumption or pollutant emissions
Membrane-coated design resists electrode contamination and failure
membrane-free design eliminates membrane cap replacement and electrolyte refills
Three-electrode design ensures stable zero point and high sensitivity
Built-in high-precision sampling circuit enables excellent linearity
High accuracy when compared with the DPD measurement method
Scenario
Water supply pipelines;
Tap water at the outlet of waterworks;
Terminal water of water supply pipelines;
Secondary water supply;
Swimming pools.
Product Video
Installation video
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Linksens Solutions, Accurate Water Sensing Worldwide
Contact Us