Linksens focused on high-end intelligent water quality monitoring equipments and solutions
Drinking Water
Drinking Water Quality Monitoring Solution
After being collected from the water source, municipal drinking water goes through conventional treatment processes including coagulation, sedimentation, filtration, and disinfection, before being delivered to users through distribution networks and secondary water supply systems. During the entire process, variations in raw water quality, chemical dosing, disinfection performance, and pipeline conditions can affect final water safety. By continuously monitoring key parameters such as turbidity, pH, residual chlorine, ORP, and ammonia nitrogen, water utilities can optimize treatment processes, detect potential risks, and ensure safe drinking water from source to end users.
Drinking Water
Case Studies
Shrimp Survival Rate Up from 82% to 95% with 24/7 Pond Monitoring
A 500-acre shrimp base operating 20 ponds faced repeated overnight DO crashes and ammonia spikes that manual testing could not catch. Linksens deployed S-DO011, S-NH134, and 3-in-1 Combo Sensors with automated aerator integration across all ponds.
↑ Survival rate: 82% → 95%
↓ 40% reduction in labor inspection costs
↑ 25% increase in total output
↑ Survival rate: 82% → 95%
↓ 40% reduction in labor inspection costs
↑ 25% increase in total output
Municipal WWTP Cuts Aeration Costs While Maintaining 100% Compliance
A municipal WWTP running fixed aeration schedules had no visibility into influent load variation. Linksens deployed S-COD161 at influent, S-DO011 in aeration tanks, and A-SEC051 at the discharge point for DO-responsive control and continuous compliance monitoring.
✓ 100% discharge compliance maintained
↓ Aeration energy reduced through DO-responsive control
↓ Response to influent events: hours → minutes
✓ 100% discharge compliance maintained
↓ Aeration energy reduced through DO-responsive control
↓ Response to influent events: hours → minutes
Chlorine Decay Now Detected Continuously vs. Previous 48–72hr Sampling Gaps
A municipal water utility found residual chlorine below minimum limits at endpoints — but only during scheduled inspections every 48–72 hours. Linksens deployed S-RC053 chlorine sensors and S-TUR033 turbidity sensors at key distribution nodes with real-time alerting.
✓ Continuous monitoring replacing 48–72hr sampling gaps
✓ 3 secondary contamination events detected and isolated
↓ Consumer taste and odor complaints reduced
✓ Continuous monitoring replacing 48–72hr sampling gaps
✓ 3 secondary contamination events detected and isolated
↓ Consumer taste and odor complaints reduced
River Basin Pollution Source Traced Within Hours Instead of Days
An environmental agency monitoring a cross-boundary river basin needed to move beyond manual sampling every 2–3 days. Linksens deployed 12 solar-powered stations using Multiparameter Sondes, S-COD161, and S-NH134, uploading data every 15 minutes via 4G.
✓ 12 stations · readings every 15 minutes
↓ Pollution detection: days → hours
✓ Multi-station data enables source tracing within same event
✓ 12 stations · readings every 15 minutes
↓ Pollution detection: days → hours
✓ Multi-station data enables source tracing within same event
Why Linksens
From pH and DO to chlorophyll-a and blue-green algae — one supplier for your entire sensor portfolio, reducing integration complexity.
Digital smart sensors with anti-fouling protection and self-diagnostic capability, engineered to extend calibration intervals and reduce site visits.
Standard Modbus, RS485, and 4–20mA outputs. Plug into your existing platform without custom engineering work.
Deployed across 30+ countries with deep project experience in Southeast Asia, South Asia, and Latin America — markets Hach and YSI don't prioritize.
How We Help
From understanding your project to long-term optimization after deployment, we support you at every step.
Whether it's compliance pressure at a treatment plant or real-time alerting needs at a fish farm, we start by understanding your specific scenario, site conditions, and core requirements — not by pushing a product.
Based on your water type, required parameters, and budget, we recommend a tailored product configuration — from sensors and online analyzers to intelligent monitoring platforms — rather than a one-size-fits-all package.
Our engineering team supports installation guidance and integration with your existing SCADA or data platforms, ensuring the new solution works seamlessly within your current operations — not as an isolated add-on.
After deployment, we continue providing technical support and maintenance guidance, helping you refine your monitoring strategy over time based on real operating data to reduce long-term costs.
Find My Solution
Not sure which solution fits your project?
Not sure which wastewater monitoring configuration fits your facility? Tell us about your plant type, process configuration, and key compliance parameters.
Our engineers typically respond within 1 business day with an initial recommendation.
Linksens Solutions, Accurate Water Sensing Worldwide
Contact Us